Keaney, Iain, Costello, Ronan and Ringwood, John (2014) Evanescent wave reduction using a segmented wavemaker in a two dimensional wave tank. Proceedings of the ASME 2014 33rd International Conference on Ocean, Offshore and Arctic Engineering OMAE2014.
Preview
JR_Evanescent mode.pdf
Download (1MB) | Preview
Abstract
The concept of a segmented wavemaker, in a two dimensional
tank, has been investigated analytically to see if it can
reduce the effect of parasitic evanescent waves in a wave tank.
Evanescent waves can contaminate test areas in tanks leading
to unreliable results, but are typically avoided by establishing
the test area two to three times the water depth away from the
wavemaker. This space requirement can be quite restrictive in
terms of the necessary tank size and, with the increasing interest
in off-shore renewable energy, many technology developers may
not be able to afford a workspace large enough to accommodate
a long tank. Previously, flexible wavemakers have been designed
to tackle the problem and, in some cases have proven very effective
in eliminating evanescent waves at the wavemaker’s ”tuned”
frequency. However, flexible wavemakers have been shown to
have little benefit in modeling panchromatic seas. Discussed
here is the linear potential theory of a segmented wavemaker designed
to reduce the evanescent waves in a tank over a large
frequency range. Each segment in the segmented wavemaker is
programmed with an individual stroke, allowing the system to
best approximate the horizontal displacement of the fluid over
the depth of the water in a naturally occurring wave. A comparison
of the influence of evanescent waves created by segmented
wavemakers, piston and hinged paddle wavemakers, on the free
surface elevation is presented.
Item Type: | Article |
---|---|
Keywords: | Evanescent wave reduction; segmented wavemaker; two dimensional wave tank; |
Academic Unit: | Faculty of Science and Engineering > Electronic Engineering Faculty of Science and Engineering > Research Institutes > Centre for Ocean Energy Research |
Item ID: | 6774 |
Depositing User: | Professor John Ringwood |
Date Deposited: | 13 Jan 2016 10:31 |
Journal or Publication Title: | Proceedings of the ASME 2014 33rd International Conference on Ocean, Offshore and Arctic Engineering OMAE2014 |
Publisher: | ASME |
Refereed: | Yes |
Related URLs: | |
URI: | https://mu.eprints-hosting.org/id/eprint/6774 |
Use Licence: | This item is available under a Creative Commons Attribution Non Commercial Share Alike Licence (CC BY-NC-SA). Details of this licence are available here |
Repository Staff Only (login required)
Downloads
Downloads per month over past year